12 Cavity wooden Soap Mould - Tara

£39.99

A wooden  12 cavity soap mould also known as the "Tara" mould. Made with untreated FSC ply wood with an insert to make 12 bars of either cold process or hot process soap. The mould comes with side inserts, a base insert, the dividers and replacement inserts will be available soon. This is our new and improved mould with metal bolts for a much easier de-mould. The plastic inserts can not be used in an oven.

The mould will accommodate between 1.5kg and 2kg of soap batter depending on what oils you use in your recipe and how the mould is used. This mould has not been tested with melt and pour soap.  Please note this mould can not be used in the oven.

The inserts for this mould are pliable and may need to be straightened up after they have been inserted into the mould. The mould is untreated and needs to be lined to protect the wood, the plastic base and side inserts can then be inserted to offer a smooth surface to your finished soap.

Please note, due to the handmade nature of these moulds, all measurements are approximate and may vary.

The mould with the inserts will make soap bars size 7cm x 5cm and and up to 5.5cm high.

The inside dimensions of the mould are: 31cm x 16.9cm with a total height of 8cm.

The depth of the wood used to make the sides of the mould, is approximately 18mm.


Add to basket:

  • Shipping Weight: 5Kgs
  • 4 Units in Stock


This product was added to our catalogue on Tuesday 20 March, 2012.

Your IP Address is: 54.80.26.116
Copyright © 2017 The Moulds Shop. Powered by Zen Cart. Website by : Sloan IT Services